Project | The current capacity | 2014 |
The highest level | 68 layer | 68 layer |
The minimum line width / spacing | 3mil/3mil | 2.5mil/2.5mil |
The largest copper thickness | 10 OZ | 10 OZ |
The minimum Kong Jing | Mechanical drilling of 4 mil Laser drilling of 3 mil |
Mechanical drilling of 4 mil Laser drilling of 2 mil |
The maximum thickness to diameter ratio | 18:1 | 22:1 |
Impedance control tolerance | ±5% | ±3% |
Form tolerances | ±0.1mm | ±0.1mm |
Material Science | FR-4, Tg, halogen, ceramic filled, PTFE, PI, BT, PPO, PPE, RF / microwave (Rogers, Taconic, Arlon, F4B), metal matrix / core (aluminum and copper, iron) Metal based/core | |
Surface treatment | HASL, OSP, gold, gold, silver, tin deposition | |
Special processing | Rigid flex, buried, buried, buried core fiber capacitance / resistance, three order HDI, disk stack hole plate, the inner / outer layer hollow board, high TG thick copper, mixed compression, local mixed compression, surface coating, metal substrate / core plate, plate edge metallization, buried hole, blind hole, step groove, local high density, back drilling, impedance control |